Dremel Гравёр DREMEL Uživatelský manuál stáhnout pdf (Strana 5)

5

ORIGINAL INSTRUCTIONS

!

ﺮـﻳﺬـﺤـﺗ

READ ALL INSTRUCTIONS.

Failure to follow all instructions

listed below may result in electric shock, fire and/or serious injury.

The term "power tool" in all of the warnings listed below refers to

your mains operated (corded) power tool.

SAVE THESE INSTRUCTIONS

1. WORK AREA

a. Keep work area clean and well lit. Cluttered and dark areas

invite accidents.

b. Do not operate power tools in explosive atmospheres, such as

in the presence of ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

2. ELECTRICAL SAFETY

a. Power tool plugs must match the outlet. Never modify the

plug in any way . Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such

as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or

grounded.

c. Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d. Do not abu se the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

3. PERSONAL SAFETY

a. Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while

you are tired or under the inﬂuence of drugs, alcohol or

medication. A moment of inattention while operating power

tools may result in serious personal injury.

b.

Use safety equipment. Always wear eye

protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal

injuries.

c. Avoid accidental starting. Ensure the switch is in the off

position before plugging in. Carrying power tools with your

finger on the switch or plugging in power tools that have the

switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in

unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep

your hair, clothing and gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of these devices can reduce dust related

hazards.

h. Do not work materials containing asbestos (asbesto s is

considered carcino genic).

i. Take protective measures when during work dust can

develop that is harmful to one's health, combustible or

explosive (some dusts are considered carcinogenic); wear

a dust mask and work with dust/ ch ip extraction when

connectable.

4. POWER TOOL USE AND CARE

a. Do not force the power tool. Use the correct power t ool for

your applicati on. The correct power tool will do the job better

and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c. Disconnect the plug from the power source before making

any adjustments, changi ng accessor ies, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power t ool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and an y other condition that

may affect the power tools operation. If damaged, have th e

power tool repaired bef ore use. Many accidents are caused

by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner

intended for the particul ar type of power tool, taking

into account the working conditions and the work to be

performed. Use of the power tool for operations different from

intended could result in a hazardous situation.

5. SERVICE

a. Have your power tool serviced by a qualiﬁed repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

GB

Dremel Гравёр DREMEL Uživatelský manuál Strana 5

Komentáře k této Příručce

Dremel Гравёр DREMEL Uživatelský manuál Strana 5

Komentáře k této Příručce

Související produkty a manuály pro Nástroje Dremel Гравёр DREMEL